EVALUATION OF THERMAL AND MECHANICAL PROPERTIES OF DEMONSTRATION WALL UTILIZING PHASE CHANGE CEMENTITIOUS MATERIALS

International project PoroPCM involves partners from Germany, Czech Republic, Spain and Japan with the objective to develop new multifunctional Phase Change Materials modified porous cementitious nanocomposite (PoroPCM). Such material can be utilized for storing heat energy in the insulation layer of buildings compared to commonly used insulation materials since the phase change increases heat capacity. This enhanced feature reduces the amount of energy necessary for running the heating/cooling system. For the testing of the newly developed phase change cementitious composite a demonstration wall will be developed and tested for its thermal as well as mechanical performance. The topic of the paper is the description of the properties of the new phase change cementitious nanocomposite. The main emphasis of the paper is the description of the demonstration wall behaviour under typical environmental conditions. The wall design is supported by numerical simulation of the wall physical parameters. The numerical modelling involves the definition of suitable numerical models for the simulation of the thermal properties of the new phase change nanocomposite. The numerical model is then used to demonstrate the performance of the wall layer design. The presented pilot results show efficiency increase of the insulation material in the range 15–70%. Also modelling of wind resistance of the layered structure is included. The developed wall design and PoroPCM material will be tested and verified by a large scale test in the final year of the project

Shear-induced pressure changes and seepage phenomena in a deforming porous layer-I

We present a model for flow and seepage in a deforming, shear-dilatant sensitive porous layer that enables estimates of the excess pore fluid pressures and flow rates in both the melt and solid phase to be captured simultaneously as a function of stress rate. Calculations are relevant to crystallizing magma in the solidosity range 0.5–0.8 (50–20 per cent melt), corresponding to a dense region within the solidification front of a crystallizing magma chamber. Composition is expressed only through the viscosity of the fluid phase, making the model generally applicable to a wide range of magma types. A natural scaling emerges that allows results to be presented in non-dimensional form. We show that all length-scales can be expressed as fractions of the layer height H, timescales as fractions of H2(nβ'θ+ 1)/(θk) and pressures as fractions of . Taking as an example the permeability k in the mush of the order of magnitude 1015 m2 Pa1 s1, a layer thickness of tens of metres and a mush strength (θ) in the range 108–1012 Pa, an estimate of the consolidation time for near-incompressible fluids is of the order of 105–109 s. Using mush permeability as a proxy, we show that the greatest maximum excess pore pressures develop consistently in rhyolitic (high-viscosity) magmas at high rates of shear ( , implying that during deformation, the mechanical behaviour of basaltic and rhyolitic magmas will differ. Transport parameters of the granular framework including tortuosity and the ratio of grain size to layer thickness (a/H) will also exert a strong effect on the mechanical behaviour of the layer at a given rate of strain. For dilatant materials under shear, flow of melt into the granular layer is implied. Reduction in excess pore pressure sucks melt into the solidification front at a velocity proportional to the strain rate. For tectonic rates (generally 1014 s1), melt upwelling (or downwelling, if the layer is on the floor of the chamber) is of the order of cm yr1. At higher rates of loading comparable with emplacement of some magmatic intrusions (1010 s1), melt velocities may exceed effects due to instabilities resulting from local changes in density and composition. Such a flow carries particulates with it, and we speculate that these may become trapped in the granular layer depending on their sizes. If on further solidification the segregated grain size distribution of the particulates is frozen in the granular layer, structure formation including layering and grading may result. Finally, as the process settles down to a steady state, the pressure does not continue to decrease. We find no evidence for critical rheological thresholds, and the process is stable until so much shear has been applied that the granular medium fails, but there is no hydraulic failure

Capturing Patient Value in an Economic Evaluation

OBJECTIVE: Economic evaluations predominantly use generic outcomes, such as EuroQol-5 Dimension (EQ-5D), to assess the health status. However, because of the generic nature, they are less suitable to capture the quality of life of patients with specific conditions. Given the transition to patient-centered (remote) care delivery, this study aims to evaluate the possibility to use disease-specific measures in a cost-effectiveness analysis (CEA).METHODS: A real-life cohort from Maasstad Hospital (2020-2021) in the Netherlands, with 772 Rheumatoid Arthritis (RA) patients, was used to assess the cost-effectiveness of electronic consultations (e-consultations) compared with face-to-face consultations. The Incremental Cost-Effectiveness Ratio (ICER) based on the generic EQ-5D was compared with ICER's based on RA specific measures; Rheumatoid Arthritis Impact of Disease (RAID) and Health Assessment Questionnaire-Disability Index (HAQ-DI). To compare the cost-effectiveness of these different measures, HAQ-DI and RAID were expressed in QALYs via estimated conversion equations.CONCLUSIONS: The conventional ICER (e.g. EQ-5D) indicates that e-consultations are cost-effective with cost savings of - €161k per QALY gained for a prevalent RA cohort treated in a secondary trainee hospital. RA specific measures show similar results, with ICER's of - €163k per HAQ-DI(QALY) and - €223k per RAID(QALY) gained. RA specific measures capture patient-relevant domains and offer the opportunity to improve the assessment and treatment of the disease impact.DISCUSSION: Disease-specific patient-reported outcome measures (PROMs) offer a promising alternative for traditional measures in economic evaluations, capturing patient-relevant domains more comprehensively. As PROMs are increasingly applied in clinical practice, the next step entails modelling of a RA patient-wide conversion equation to implement PROMs in economic evaluations. This article is protected by copyright. All rights reserved.</p

Igneous differentiation by deformation

In a paper published in 1920, Bowen conceived of a situation where forces acting on a crystalline mesh could extract the liquid phase from the solid, and in doing so cause variations in chemistry distinct from the purely gravitational effects of fractional crystallisation. His paper was a call-to-arms to explore the role of deformation as a cause of variation in igneous rocks, but was never followed-up in a rigorous way. Inspired by this, we have developed a quantitative model showing how shear deformation of a crystallised dense magma (ϕ > 70%) with poro-elastic properties is analogous to a granular material. The critical link between the mechanics and associated compositional changes of the melt is the degree to which the crystallising magma undergoes dilation (volume increase) during shear. It is important to note that the effect can only take place after the initial loose solid material has undergone mechanical compaction such that the grains comprising the rigid skeleton are in permanent contact. Under these conditions, the key material parameters governing the dilatancy effect are the physical permeability, mush strength, the shear modulus and the contact mechanics and geometry of the granular assemblage. Calculations show that dilation reduces the interstitial fluid (melt) pressure causing, in Bowen’s words, “the separation of crystals and mother liquor” via a suction effect. At shear strain rates in excess of the tectonic background, deformation-induced melt flow can redistribute chemical components and heat between regions of crystallising magma with contrasting rheological properties, at velocities far in excess of diffusion or buoyancy forces, the latter of course the driving force behind fractional crystallisation and viscous compaction. Influx of hotter, less evolved melt drawn internally from the same magma body into regions where crystallisation is more advanced (auto-intrusion), may result in reverse zoning and/or resorption of crystals. Because dilatancy is primarily a mechanical effect independent of melt composition, evolved, chemically distinct melt fractions removed at this late stage may explain miarolitic alkaline rocks, intrusive granophyres in basaltic systems and late stage aplites and pegmatites in granites (discontinuous variations), as proposed by Bowen. Post-failure instabilities include hydraulic rupture of the mush along shear zones governed by the angles of dilation and internal friction. On the macro-scale, a combination of dilatancy and fracturing may provide a means to extract large volumes of chemically evolved melt from mush columns on short (<1000 year) geological timescales

Role of Interleukin 17 in arthritis chronicity through survival of synoviocytes via regulation of synoviolin expression

Background: The use of TNF inhibitors has been a major progress in the treatment of chronic inflammation. However, not all patients respond. In addition, response will be often lost when treatment is stopped. These clinical aspects indicate that other cytokines might be involved and we focus here on the role of IL-17. In addition, the chronic nature of joint inflammation may contribute to reduced response and enhanced chronicity. Therefore we studied the capacity of IL-17 to regulate synoviolin, an E3 ubiquitin ligase implicated in synovial hyperplasia in human rheumatoid arthritis (RA) FLS and in chronic reactivated streptococcal cell wall (SCW)-induced arthritis.&lt;p&gt;&lt;/p&gt; Methodology/Principal Findings: Chronic reactivated SCW-induced arthritis was examined in IL-17R deficient and wild-type mice. Synoviolin expression was analysed by real-time RT-PCR, Western Blot or immunostaining in RA FLS and tissue, and p53 assessed by Western Blot. Apoptosis was detected by annexin V/propidium iodide staining, SS DNA apoptosis ELISA kit or TUNEL staining and proliferation by PCNA staining. IL-17 receptor A (IL-17RA), IL-17 receptor C (IL-17-RC) or synoviolin inhibition were achieved by small interfering RNA (siRNA) or neutralizing antibodies. IL-17 induced sustained synoviolin expression in RA FLS. Sodium nitroprusside (SNP)-induced RA FLS apoptosis was associated with reduced synoviolin expression and was rescued by IL-17 treatment with a corresponding increase in synoviolin expression. IL-17RC or IL-17RA RNA interference increased SNP-induced apoptosis, and decreased IL-17-induced synoviolin. IL-17 rescued RA FLS from apoptosis induced by synoviolin knockdown. IL-17 and TNF had additive effects on synoviolin expression and protection against apoptosis induced by synoviolin knowndown. In IL-17R deficient mice, a decrease in arthritis severity was characterized by increased synovial apoptosis, reduced proliferation and a marked reduction in synoviolin expression. A distinct absence of synoviolin expressing germinal centres in IL-17R deficient mice contrasted with synoviolin positive B cells and Th17 cells in synovial germinal centre-like structures.&lt;p&gt;&lt;/p&gt; Conclusion/Significance: IL-17 induction of synoviolin may contribute at least in part to RA chronicity by prolonging the survival of RA FLS and immune cells in germinal centre reactions. These results extend the role of IL-17 to synovial hyperplasia.&lt;p&gt;&lt;/p&gt

Frequency analysis of vocalisations in relation to the growth in broiler chicken

Poultry is one of the lowest cost sources of animal protein in the world and, more than 40 billion chickens are produced every year globally. For reasons of public concern and due to the large number of animals involved, it is considered by many people to be important to take care of the welfare and health status of the chickens reared under intensive farm conditions. Precision Livestock Farming (PLF) can support the farmer in his day to day routine management through the use of sensors, cameras and microphones, and these have the potential to improve production and to enable monitoring of welfare status. In this context, the 7FP EU-PLF project aims to test the efficiency of the use of those sensors at farm level. In particular, the aim of this study was to record and analyse broiler vocalisations under normal farm conditions and to identify the relation between animal sounds, and growth trends. Recordings were made at regular intervals, for the entire short production life of the birds, in order to evaluate the variation of frequency and bandwidth of the sounds emitted by the animals during the cycle of production. The recordings were made in an automated, non-invasive and non-intrusive way and the sound data was compared with the weight of the birds automatically measured by a 'step on scale' placed on the floor of the broiler house. Sound analysis was performed based on the amplitude and frequency of the sound signal in audio files recorded at farm level. Through analysis of the sounds recorded, a significant correlation (P<0.001) between the frequencies of the vocalisations recorded and the weight of the broilers was found across all production cycles and farms assessed. The ongoing goal will be the development of a tool able to automatically detect the growth of the animals based on the frequency of the vocalisation emitted by the birds at different ages, and as a possible tool for determining deviations from their expected growth trend

Risk factor for footpad dermatitis and hock burns in broiler chickens

Footpad dermatitis (FPD) and hock burn (HB) are a major welfare concern in broiler chicken farming. In general, foot lesions are linked to poor environmental conditions. Ulcers caused by advanced lesions can negatively affect the gait of the birds, with effects on the welfare of animals, including, in the worst cases, inability to reach the feed or water. FPD and HB score data were collected manually at two broiler farms across Europe, during welfare assessments performed within the EU-PLF (Precision Livestock Farming) project, which is supported by the European Commission. This ongoing project aims to create "added value" for the farmer through the application of sensors and information technology at farm level. On those broiler farms, a number of variables such as temperature, relative humidity, ventilation rate, bird weight, light schedule, and feed and water consumption rates are measured automatically. The welfare of the chickens was assessed three times per cycle (at week 3, 4 and 5), scoring FPD, HB, gait score, cleanliness of the birds and litter quality. Data analysis was performed by combining data from the welfare assessments with environmental data collected by the automatic monitoring systems. The analysis showed that FPD and HB were more frequent when the flock was exposed to poor environmental conditions for prolonged periods of time. As environmental conditions can be measured continuously, and the risk factor for FPD and HB increases with poor environmental conditions, there is potential to develop a detection and control system for foot and hock lesions.</p